X hits on this document

203 views

0 shares

0 downloads

0 comments

28 / 62

MARTECH RCD PRO

5. Find Code – Fast Mode – function to find the code according to the old algorithm. Applies only to models of radios / navigation with the old firmware.

6. Find Code – Slow Mode – code serach function.

It is the function of retrieving the radio code according to the parameters by the user. There we have the possibility of search settings in auto mode or manual. Auto mode searches for the first two digits of the code, the search is therefore limited to checking up to 100 codes. This accelerates the process of finding the correct code for max 20 minutes time. In the case of a bad eeprom readout, countdown starts at 0000 from. In manual mode you can set your code, from which the search will take place. For this purpose, press Change and using CLIP keys: UP and DN, set the appropriate value of the initial code. It should be noted that a single push of a code increment the value of the unit, and longer holding the key UP or DN will increase in increments of code 10th.

7. Expander Keyboard Test – this function is checking the correctness of the signals connect the keyboard section. In addition, in the case of navigation with touch panel, allows you to call SAFE2. Properly executed Test will print on the LCD radio / navigation code and approval given him the OK button. In the case of defective work - please check connections between Expander and radio / navigation.

User manual

28

Document info
Document views203
Page views203
Page last viewedSun Dec 04 18:28:09 UTC 2016
Pages62
Paragraphs746
Words6181

Comments