X hits on this document

268 views

0 shares

0 downloads

0 comments

35 / 62

MARTECH RCD PRO Remember to connect the radio power supply 12V/3A.

+12V GND

6.4.2 RCDPRO_RNS510 module functions

R C D P R O _ R N S 5 1 0 _ v 1 3 h a s f o l l o w i n g f e a t u r e s :

  • -

    Service Mode On – enables service mode. Service mode allows you to edit the code navigation.

Service Mode ON function requires a restart of navigation. This is done by disconnecting the 12V power supply for a while. After reboot it will goes to service mode.

  • -

    Service Mode Off – disabling service mode. Turning this mode will change your navi mode to normal

mode. Requires a restart of navigation. This is done by disconnecting the 12V power supply for a while.

  • -

    Set New Navi Code – feature only available in the service mode of navigation.

It allows you to edit the code.

  • -

    Enable Video Mode - feature for unlocking possibility of watching video Chile driving.

Does not require the use of the service mode

User manual

35

Document info
Document views268
Page views268
Page last viewedSun Dec 11 10:08:58 UTC 2016
Pages62
Paragraphs746
Words6181

Comments