MARTECH RCD PRO
Module designed to work with Gamma 3 by Philips.
Martech CLIP with RCD PRO activation
12V/3A Power supply (for radio power supply)
Depending on the version we have:
Radios based on 24c02 i 24c04 (Part number: 357 035 186G)
Radios based on 24c04 i 24c04 (Part number: 357 035 186D)
Proper system identification is required to properly unlock the radio.
Attention! GAMMA3 support requires connection to the radio directly from Clip (no Expander). In addition, you need to build a small layout of the divider on the line with PORT2.4, and the layout of the transistor and the resistor to the line PORT1.8.