X hits on this document

966 views

0 shares

0 downloads

0 comments

108 / 255

Land Rover HomeLink®

®

L a n d R o v e r H o m e L i n k H O M The Land Rover HomeLink® Universal Transmitter is built into the underside of the rear view mirror and provides a convenient way to replace up to three hand-held transmitters with a single built-in device. This innovative feature will learn the radio frequency codes of most current transmitters to operate garage doors and gates. With the available accessory package, the HomeLink® Transmitter can also control home or office lighting and security systems. For reliability, the HomeLink® Transmitter is powered by your vehicle’s battery and charging system. E L I N K ® T R A N S M I T T E R

Programming

1

2

3

Precautions When programming your HomeLink® Transmitter, you will be operating the garage door or gate. Be sure that people and objects are out of the way, to prevent potential harm or damage.

HANDHELD TRANSMITTER

WARNING

Do not use this HomeLink® Transmitter with any garage door that lacks safety ‘stop’ and ‘reverse’ features, as required by federal safety standard (this includes any garage or door opener model manufactured before April 1, 1982). A garage door opener which cannot ‘detect’ an object in the path of a closing door and then automatically ‘stop’ and ‘reverse’ the door, does not meet current federal safety standards. Using a garage door opener without these features increase the risk of serious injury or death. For more information on this matter, call toll-free: 1-800-355-3515.

H4105A

If after repeated attempts you do not successfully program the HomeLink® Transmitter to learn the signal of the hand-held transmitter, call toll-free for customer assistance: 1-800-355-3515.

  • 1.

    If you have previously programmed your HomeLink® Transmitter, proceed to step

    • 2.

      Otherwise, hold down the two outside buttons on the HomeLink® Transmitter until the amber light begins to flash. Release both buttons.

  • 2.

    Decide which one of the three channels you want to program.

  • 3.

    Hold the end of your hand-held transmitter against the HomeLink® Transmitter (underside of the mirror) so that you can still see the amber light (see illustration).

107

Document info
Document views966
Page views966
Page last viewedSun Dec 11 02:14:28 UTC 2016
Pages255
Paragraphs4992
Words62569

Comments