X hits on this document





110 / 255

Land Rover HomeLink®

e) Your garage door opener should now recognize your HomeLink® Transmitter. You may use either your HomeLink® Transmitter or your original hand-held transmitter to open your garage door.

If after following these suggestions you still have difficulties programming your HomeLink® Transmitter, call toll-free for customer assistance: 1-800-355-3515.

Erasing channels To erase all three programmed channels, hold down the two outside buttons until the amber light begins to flash, then release both buttons. Individual channels cannot be erased, but can be reprogrammed using the procedures for programming the HomeLink® Transmitter (steps 2 through 5).

NOTE: Be sure to retain your original transmitter for future programming procedures (i.e. new vehicle purchase).

The transmitter has been tested and complies with FCC rules part 15 and DOC/MDC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.

Operation is subject to the following two conditions:

  • 1.

    This device may not cause harmful interference: and

  • 2.

    this device must accept any interference that may be received, including interference that may cause undesired operation.

DOC: ISTC 1763K1313 Prince MODEL/FCC ID: C82 V67690

HomeLink® is a registered trademark owned by the Prince Corporation, Holland. Michigan.

When selling your vehicle, be sure to erase all channels on the HomeLink® Transmitter that you programmed.

Accessories Accessories for your HomeLink® Transmitter are available from the manufacturer of the device. If you would like additional information or would like to purchase other accessories such as home lighting or security products that can be operated by the HomeLink® Transmitter, please call the toll-free: 1-800-355-3515.


Document info
Document views1083
Page views1083
Page last viewedThu Jan 19 07:37:27 UTC 2017