X hits on this document

803 views

0 shares

0 downloads

0 comments

133 / 255

Cruise Control

To reduce the cruising speed: Press the ‘RES’ switch to slow the vehicle, until the required speed has been reached. Then press the ‘SET +’ switch to establish the new cruising speed (remember that cruise control will not operate at speeds below 28 mph (45 km/h).

To increase the set cruising speed: Press and hold the ‘SET +’ switch - the vehicle will accelerate automatically. Release the switch as soon as the desired speed has been reached.

Alternatively, the set speed can be increased incrementally by ‘tapping’ the ‘SET +’ switch. Each press of the switch will increase the speed by 1 mph (1.5 km/h approx).

Disengaging cruise control Cruise control will disengage when the gear selector is moved into neutral, or when the brake pedal is pressed. Cruise control can also be disengaged by pressing the ‘RES’ switch.

To re-engage cruise control at the previously set speed, press the ‘RES’ switch.

NOTE: The speed held in the cruise control memory will be cancelled when either the cruise control master switch or the starter switch is turned off.

132

Document info
Document views803
Page views803
Page last viewedSun Dec 04 16:59:22 UTC 2016
Pages255
Paragraphs4992
Words62569

Comments