Active Cornering Enhancement
A c t i v e C o r n e r i n g E n h a n c e m e n t A Fluid top-up C T I V E C O R N E R I N G E N H A N C E M E N T *
Check and Top-up
Fluid is highly toxic and can be fatal if swallowed - keep containers sealed and out of reach of children. If accidental consumption of fluid is suspected, seek medical attention immediately.
If fluid should come into contact with the skin or eyes, rinse immediately with plenty of water.
Do not spill fluid onto a hot engine - a fire may result.
NOTE: Fluid will damage painted surfaces; soak up any spillage with an absorbent cloth immediately and wash the area with a mixture of car shampoo and water.
Check the fluid level against the level marks on the side of the reservoir. If more fluid is needed, first wipe the filler cap clean to prevent dirt from entering the reservoir, then twist the cap a quarter turn anti-clockwise and pull to remove. Top up the reservoir until the fluid reaches the upper level mark. DO NOT OVERFILL!
Fluid specification For information on fluid specification, see ‘LUBRICANTS AND FLUIDS’, page 231.
Any large or sudden drop in the fluid level must be investigated by a qualified retailer.
NOTE: While the power steering and active cornering enhancement systems share the same fluid specification and reservoir, both systems are entirely independent of each other. The reservoir is divided into two compartments and each system has its own filler cap.