REAR LIGHT CLUSTER (Tail/Stop, marker & direction indicator
lights) From outside the vehicle remove the four retaining screws to release the light unit from the vehicle (see right).
The Tail/Stop light bulb is located above the Indicator bulb.To replace either of these larger bulbs, unscrew the bulb holder from the light unit and then push and twist to release the required bulb from the holder. Replace the required bulb and re-fit the bulb holder into the light unit, then the light unit to the vehicle body.
To replace the smaller marker light bulb, remove the plastic bulb cover. Withdraw the bulb holder from the light unit. Pull the bulb from the holder, replace the bulb and insert the bulb holder into the light unit.