FRONT FOG LIGHTS
To remove the bulb from the light unit, twist and pull, press in the two lock tabs on the electrical connector to release the bulb. Fit a new bulb to the connector and re-fit into the fog light unit.
NOTE: Do not touch the bulb glass with your fingers. If necessary, clean the bulb with isopropyl rubbing alcohol.
HIGH MOUNTED STOP LIGHT
Remove both retaining screws and the cover from the rear of the light unit. Twist the bulb holder anti-clockwise to remove. Push and twist anti-clockwise to release the bulb.
The front fog lights are accessible from the rear of the front bumpers and are shielded by the lower wheelarch liners.
Access is restricted and will entail lying beneath the center of the vehicle at the front and reaching between the wheelarch liner and the back of the fog light.