S e a t s S I T T I N G C O R R E C T L Y
POWER OPERATED FRONT SEATS
To reduce the risk of loss of control and personal injury, DO NOT adjust the driver's seat while the vehicle is in motion.
The seat adjustment controls are situated on the side of the centrally mounted cubby box.
Seat adjustment is only possible when the starter switch is turned to position ‘II’ or for 45 seconds after opening the driver's door.
The seats, head restraints, seat belts and airbags all contribute to the protection of the occupants. Optimal use of these components will give you more protection. Therefore, observe the following points:
Sit in the most upright position with the base of your spine as far back as possible and the backrest not reclined more than 30 degrees.
Adjust the head restraints so that the top of the head restraint is level with the upper portion of the head.
Do not move the front seat too close to the instrument panel. The driver should hold the steering wheel with slightly bent arms. The legs should also be slightly bent so that the pedals can be pressed to the floor.
The seat belt should rest in the center of the shoulder. The lap part should fit tightly across the hips and not on the stomach.
Push and hold the switch forwards or backwards to move the seat to the desired position.