Head restraints NOTE: The head restraints for use with the occasional rear seats are hinged from the roof.
4. Continue lifting, at the same time turning the seat into a vertical position.
1. To unfold a head restraint, pull the handle (arrowed in illustration) forward and swing the restraint down from the roof. Stow the head restraint when not in use by pulling down the handle and pushing the restraint back flush with the roof.
Push the seat firmly into the vehicle side, ensuring that the seat has engaged fully with the securing catch.
Stow the head restraints (see opposite).
DO NOT drive with occupants in the occasional rear seats unless the head restraints are unfolded. Failure to unfold the head restraints from the roof when that seat is occupied will increase the potential for serious injuries.