X hits on this document

157 views

0 shares

0 downloads

0 comments

11 / 62

Hookup and Settings

Rear Panel

a

b

c

d

e

f

g

h

i

j

k

l

m

n

a AERIAL Connect the aerial to this terminal.

b AUDIO OUT (Left/Right) Connect to a TV with audio inputs.

c VIDEO OUT Connect to a TV with video inputs.

i Cooling fan

j AC Power Cord Plug into the power source.

k RF. OUT Passes the signal from the AERIAL to your TV/monitor

d COMPONENT VIDEO OUT/PROGRESSIVE SCAN (Y Pb Pr) Connect to a TV with Y Pb Pr inputs.

l AUDIO IN 3 (Left/Right) Connect the audio output of an external source (Audio system, TV/Monitor, VCR, Camcorder).

e VIDEO OUTPUT Switch Select either COMPONENT VIDEO OUT or RGB signal of EURO AV1 AUDIO/VIDEO terminal depending on how you connect the recorder to the TV.

m VIDEO IN 3 Connect the video output of an external source (Audio system, TV/Monitor, VCR, Camcorder).

n COAXIAL (Digital audio out jack) Connect to digital (coaxial) audio equipment.

f EURO AV 1 AUDIO/VIDEO Connect to a TV with SCART jack.

g EURO AV 2 DECODER Connect the audio/video output of an external source (Pay-TV decoder, Set Top Box, VCR, etc.).

h OPTICAL (Digital audio out jack) Connect to digital (optical) audio equipment.

Connecting to the Aerial

Aerial

Rear of TV

SCART INPUT

Remove the aerial cable plug from your TV set and insert it into the aerial socket at the back of the recorder. Plug one end of the aerial cable into the TV socket on the recorder and the other end into the aerial input socket on your TV set.

ANTENNA INPUT

AUDIO INPUT

L

R

VIDEO INPUT

R

RF coaxial connection Connect the RF. OUT jack on the recorder to the aerial input jack on the TV using the 75-ohm Coaxial Cable supplied (R). The RF. OUT jack passes the signal through from the AERIAL jack.

Rear of the recorder

11

Hookup and Settings

Document info
Document views157
Page views157
Page last viewedThu Dec 08 06:08:56 UTC 2016
Pages62
Paragraphs3108
Words28891

Comments