X hits on this document

136 views

0 shares

0 downloads

0 comments

18 / 62

18

Auto Clock Set

When Channel auto search is completed the actual Time and Date are also set automatically. If the time in the recorder display is not correct, the clock must be set manually.

  • 1.

    Select [Clock set] option then press B.

  • 2.

    Use v / V to select [Auto] option then press

ENTER.

Note: There are cases where the TV station does not send, or sends wrong date and/or time information and the recorder sets the incorrect time. If this happens, we recommend that you set the clock manually.

Manual Clock Set

  • 1.

    Select [Clock set] option then press B.

  • 2.

    Use v / V to select [Manual] option then press

ENTER.

3. Enter the necessary information for date and time.

b / B (left/right): Moves the cursor to the previous or next column.

v / V (up/down): Changes the setting at the current cursor position.

4. Press ENTER to confirm your setting, then press SETUP to exit the Setup menu.

TV Aspect

Selects the aspect ratio of the connected TV (4:3 standard or wide).

  • [4:3] Select this when connecting to a 4:3 screen TV. When you select [4:3], set [Display Mode] below.

  • [16:9] Select this when connecting to a wide-screen TV or TV with a wide mode function.

Display Mode

Selects how to display a wide picture on the screen when [4:3] is selected in [TV Aspect].

  • [Letter Box] Displays a wide picture with bands on the upper and lower portions of the screen.

  • [Pan Scan] Automatically displays a wide picture on the entire screen and cuts off the portions that do not fit.

Document info
Document views136
Page views136
Page last viewedSun Dec 04 23:44:49 UTC 2016
Pages62
Paragraphs3108
Words28891

Comments