X hits on this document

165 views

0 shares

0 downloads

0 comments

29 / 62

3D Surround

  • -

    RWVR

  • -

    RWVideo

+RW

  • -

    R

+R

DVD

VCD

DivX

This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi- channel audio from a home theater system.

  • 1.

    Press 3D SURR. then press b / B repeatedly during playback to select [3D SUR.].

  • 2.

    To turn off the 3D Surround effect, select [NORMAL].

Subtitles DVD DivX

Press SUBTITLE then press b / B repeatedly during playback to see the different subtitle languages.

Instant Skip HDD

  • -

    RWVR

  • -

    RWVideo

+RW

  • -

    R +R DVD

Each press I.SKIP skips forward 15 seconds.

In HDD playback or Timeshift mode, each press b / B skips forward or reverse 5 minutes.

Note:

If

appears, the feature is not available on the disc.

Finding Locations on a Disc VCD

You can directly access any point on a video CD using this function. Use this function only while a video CD is playing. Playback jumps to the point specified.

1. Press SEARCH during playback. The progress bar appears on the TV screen.

2. Use b / B to find a start position for playback.

3. Press ENTER to confirm the selected position. P l a y b a c k s t a r t s f r o m t h e s e l e c t e d p o s i t i o n . N o t e : This function works only when no marker is memorized.

Last Condition Memory DVD

This recorder memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the recorder or switch off the recorder. If you load a disc that had its settings memorized, the latest stop position is automatically recalled.

Notes:

  • Settings are stored in memory for use any time.

  • This recorder does not memorize settings of a disc if you switch off the recorder before commencing to play it.

PIP (Picture in Picture) HDD

  • -

    RWVR

  • -

    RWVideo

+RW

  • -

    R

+R

DVD

VCD

This function enables you to view the stored stations in sub picture during playback.

On and off Press PIP to switch on the sub picture, press this button again to switch it off.

Input mode selection for sub picture Press AV to select the input mode for the sub picture. Each time this button is pressed, each input mode for the sub picture is displayed as shown below. Tuner AV1 AV2 AV3 AV4

Program selection for sub picture Use v / V to change the program when sub picture’s input is set to tuner. The selected program number is displayed on the TV screen. You can view the selected program by pressing STOP (x).

Sub picture position change Press b / B repeatedly until desired position is achieved. The sub picture moves clockwise or counterclockwise.

Zoom Sub picture Press ZOOM repeatedly to enlarge the sub picture, the magnification level increases up to three steps.

29

Playback

Document info
Document views165
Page views165
Page last viewedFri Dec 09 08:06:18 UTC 2016
Pages62
Paragraphs3108
Words28891

Comments