X hits on this document

161 views

0 shares

0 downloads

0 comments

58 / 62

58

Controlling Your TV with the Supplied Remote Control

You can control the sound level, input source, and power switch of your LG TV with the supplied remote.

You can control your TV using the buttons below.

TV Control Buttons

By pressing

POWER AV

You can Turn the TV on or off.

Switch the TV’s input source between the TV and other input sources.

PR +/–

Scans up or down through memorized channels.

VOL +/– MUTE

Adjust the volume of the TV.

Temporarily turns TV sound OFF, press again to restore.

Controlling other TVs with the remote

You can control the sound level, input source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer code.

  • 1.

    While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV (see the table below).

  • 2.

    Release TV POWER button.

Code numbers of controllable TVs

Manufacturer

Code Number

LG / GoldStar

1 (Default), 2

Zenith

1, 3, 4

Samsung

6, 7

Sony

8, 9

Hitachi

4

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Notes:

  • Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code.

  • If you enter a new code number, the code number previously entered will be erased.

  • When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.

Document info
Document views161
Page views161
Page last viewedThu Dec 08 12:33:13 UTC 2016
Pages62
Paragraphs3108
Words28891

Comments