X hits on this document





3 / 18

Pop Maxx 12/14 Oz. Popcorn Machine


This manual covers 12/14 Oz. Pop Maxx Popcorn Machine model numbers 2552, 2552C, 2552UW (Uncle Walt’s), 2552EX, and 2552XJ.

Installation Instructions

Inspection of Shipment:

Unpack all cartons and check thoroughly for any damage that may have occurred during transit. Damage claims should be filed immediately with the transportation company. It is your responsibility to file claim immediately.


Your new Pop Maxx Popcorn Machine is completely assembled and tested at the factory. Remove all packing material and tape before starting operation.

Electrical Requirements:

The following power supply must be provided:

Model No. 2552: Model No. 2552C: Model No. 2552UW: Model No. 2552EX: Model No. 2552 XJ:

120 VAC, 60 Hz. 120 VAC, 60 Hz. 120 VAC, 60 Hz. 240 VAC, 50 Hz. 100 VAC, 50/60 Hz.

All Models have 1800 Watts.

Your electrician must furnish sufficient current for proper machine operation. It is Gold Medal Products Company’s recommendation that this machine be fused on a line by itself. Failure to wire properly will void the warranty and can result in damage to the heat elements, light, motor and etc.

It is Gold Medal Products Company’s recommendation that this machine be plugged directly into a wall outlet. The use of extension cords is not recommended due to safety reasons and the popper’s performance will be sacrificed/reduced.

Before You Plug In Machine:

  • 1.

    Make sure that the wall outlet can accept the three (3) prong grounded plug on the power supply cord.

  • 2.

    The wall outlet must have the proper polarity. If in doubt, have a competent electrician inspect the outlet

and correct if necessary.

3. DO NOT use a three (3) prong to two (2) prong adapter.


Models #2552, #2552C, 2552UW, #2552EX, #2552JX

Document info
Document views16
Page views16
Page last viewedSun Aug 07 12:47:21 UTC 2016