X hits on this document

PDF document

Operating Instructions - page 14 / 60

289 views

0 shares

0 downloads

0 comments

14 / 60

Before using

The batteries heat up after use or charging. The

main unit of the Camcorder being used will also heat up. This is normal. Along with the reduction of the battery capacity,

the display will change:

  • #

    #

discharges, then

(

  • #

    #

. If the battery ) will flash.

Selecting a mode (Turning the Camcorder on/off)

When recording, open the lens cover before turning the unit on. (-12-) If the unit is turned on with the lens cover closed, the automatic white balance adjustment (-49-) may not function properly. Rotate the mode dial to select the desired mode or OFF. Rotate the mode dial slowly.

ª How to turn on the power

1 While pressing the lock release button A, set the mode dial to select the desired mode. Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF to another mode. Align with the mark B.

A

B

The Status indicator lights red and the power turns on.

ª How to turn off the power 1 Set the mode dial to OFF.

The Status indicator goes off when the power turns off.

TAPE RECORDING MODE

Use this when you record the image on a tape.

TAPE PLAYBACK MODE Use this to play back a tape.

OFF

The power turns off.

14

LSQT1284

Document info
Document views289
Page views289
Page last viewedFri Jan 20 12:04:54 UTC 2017
Pages60
Paragraphs1619
Words19264

Comments