5 Move the joystick right or press it to set the selection.
Adjusting LCD monitor/viewfinder
ª Adjusting the brightness and color level
1 Set [SETUP] >> [LCD SET] or [EVF SET] >> [YES].
6 Move the joystick up or down in order to select the item to be set.
2 Move the joystick up or down in order to select the item to be adjusted.
7 Press the joystick to determine the setting.
[LCD SET] ≥When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD monitor cannot be adjusted. ≥These settings will not affect the images actually
ª To exit the menu screen Press the [MENU] button.
ª To get back to the previous screen Move the joystick left.
: Brightness of the LCD monitor : Color level of the LCD monitor
[EVF SET] ≥To adjust the brightness of the viewfinder, close
the LCD monitor and extend the viewfinder to activate it. ≥These settings will not affect the images actually
:Brightness of the viewfinder
ª About the menu setting
3 Move the joystick left or right to move the bar indication representing the brightness.
≥The menu is not displayed while recording on a tape. Also, you cannot record on a tape while the menu is displayed.
4 Press the [MENU] button or the joystick to complete the settings.