X hits on this document

PDF document

Operating Instructions - page 26 / 60

320 views

0 shares

0 downloads

0 comments

26 / 60

Record mode

Recording a still picture on a tape (Photoshot)

Set to Tape Recording Mode.

Zoom in/out function

You can zoom in up to 42k optically. Set to Tape Recording Mode.

1 Press the Photoshot button [ recording pause mode.

] in the

1 Wide-angle recording (zoom out): Push the [W/T] lever towards [W]. Close-up recording (zoom in): Push the [W/T] lever towards [T].

The Camcorder records a still picture for about 7 seconds and then switches back to the recording pause mode. If you set [ADVANCED] >> [SHTR EFFECT] >> [ON], you can add image and a sound like releasing the shutter.

1t W

5t W

T

T

42t W

T

Photoshot recording results in slightly inferior image quality.

ª Continuous photoshot

If you set [ADVANCED] >> [SHTR EFFECT] >> [ON] and keep the [ ] button pressed, the Camcorder will continuously record still pictures

in approx. 0.7 seconds intervals until the button is

released. The screen blinks and, at the same time, a

shutter clicking sound is recorded.

When zooming in and taking a picture while holding the Camcorder by hand, we recommend using the optical image stabilizer function. -30- When you are zooming in on a faraway subject, a sharper focus is achieved if the recording subject is 1.3 m (4.3 feet) or further from the Camcorder. When the zoom speed is high, the subject may not be focused easily. When the zoom magnification is 1k, the Camcorder can focus on a subject approx. 2 cm (0.8 inches) away from the lens. Be aware that a mechanical sound may be recorded when the [W/T] lever is released while zooming. Gently move the zoom lever back to it’s original position before releasing it.

26

LSQT1284

Document info
Document views320
Page views320
Page last viewedTue Jan 24 13:35:46 UTC 2017
Pages60
Paragraphs1619
Words19264

Comments