X hits on this document

PDF document

Operating Instructions - page 33 / 60

241 views

0 shares

0 downloads

0 comments

33 / 60

Record mode

1 Press the [MANUAL AF/MF] button.

When the manual adjustment mode is selected Flashing indicates that the white balance

MANUAL AF/MF

previously adjusted is stored. This setting is stored until the white balance is adjusted again. When white balance cannot be set in the manual adjustment mode White balance may not be adjusted properly in

Recording in natural colors (White balance)

The automatic white balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. Set to Tape Recording Mode.

2 Move the joystick up to select the white

balance icon [

].

ª To set the white balance manually

Select [

] in Step 3. Then, while viewing a white

subject on the entire screen, move the joystick up

indication stops flashing.

ª About flashing of the [

] indication

the manual adjustment mode in dark places. If required, use the auto white balance mode. Setting in the manual adjustment mode When the setting is completed, it will keep lit.

ª White balance sensor

The white balance sensor detects the type of light source during recording. Do not cover the white balance sensor during

recording, or it may not function properly.

Manual focus adjustment

If auto focusing is difficult due to the conditions, then use manual focus. Set to Tape Recording Mode.

1 Press the [MANUAL AF/MF] button until the icon 1 appears.

3 Move the joystick left or right in order to select the white balance mode.

1 A W B 1 ) 2 )

1

to select the [

] indication.

The white balance is set when the [

]

3)

1

4)

1

  • 1)

    Auto white balance adjustment [ AWB ]

  • 2)

    Indoor mode (for recording under

incandescent lamps) [

]

MANUAL AF/MF

3) 4)

Outdoor mode [

]

Manual adjustment mode [

]

ª To restore to the automatic adjustment

Move the joystick left or right until the [ AWB ] indication appears. Or, press the [AUTO] button.

1

When the Camcorder is turned on with the lens cover closed, the automatic white balance adjustment may not function properly. Please turn the Camcorder on after opening the lens cover. When setting both the white balance and the iris/gain, set the white balance first. Whenever recording conditions change, re-set the white balance for correct adjustment.

The [ MNL ] indication and the manual focus [MF] indication appears.

33

LSQT1284

Document info
Document views241
Page views241
Page last viewedThu Dec 08 12:48:10 UTC 2016
Pages60
Paragraphs1619
Words19264

Comments