2 Move the joystick left or right in order to
3 Move the joystick left or right in order to
adjust the focus.
adjust the shutter speed or aperture.
≥When focused with a wide angle, the subject may not be in focus when zoomed in. First, zoom in on the subject, and then focus on it.
1/60 F2.0 0dB
ª To restore to the automatic adjustment
Press the [MANUAL AF/MF] button again or press the [AUTO] button.
Manual shutter speed/aperture adjustment
Shutter Speed Adjust it when recording fast-moving subjects. Aperture Adjust it when the screen is too bright or too dark. ≥Set to Tape Recording Mode.
1 Press the [MANUAL AF/MF] button.
2 Move the joystick left or right to select
aperture icon [
] or shutter speed icon
(Aperture) Iris/gain value
ª To restore to automatic adjustment Press the [AUTO] button.
Manual shutter speed adjustment ≥Avoid recording under fluorescent light, mercury light or sodium light because the color and brightness of the playback image may change. ≥If you increase the shutter speed manually, the noise on the screen may increase. ≥You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject, but this is not a malfunction. ≥During normal playback, image movement may not look smooth. ≥When recording in an extremely bright place, the color of the screen may change or flicker. If this happens adjust the shutter speed manually to [1/60] or [1/100].
Manual iris/gain adjustment ≥Set the shutter speed before setting the
aperture (iris/gain) when manually adjusting both settings. ≥If the value does not become “OPEN”, you
cannot adjust the gain value. ≥If the gain value is increased, the noise on the
screen increases. ≥Depending on the zoom magnification, there are
iris values that are not displayed.
ª Shutter speed range
1/30 to 1/8000 seconds: Tape Recording Mode The shutter speed closer to 1/8000 is faster. If [AUTO SLW SHTR] is set to [OFF], then the shutter speed will be set between 1/60 and 1/8000.
ª Iris/gain value range
CLOSE (Closed), F16, ..., F2.0, OPEN (Opened: F1.8) 0dB, ..., 18dB Value closer to [CLOSE] darkens the image. Value closer to [18dB] brightens the image. Values with dB are gain values.