X hits on this document

PDF document

Operating Instructions - page 35 / 60

309 views

0 shares

0 downloads

0 comments

35 / 60

Playback mode

Playback mode Playing back tape

Set to Tape Playback Mode. (An operation icon automatically appears on the LCD monitor.)

ª To adjust the speaker volume during playback

1 Move the [sVOLr] lever to adjust the volume.

1 Operate with joystick.

Towards [r]: increases the volume Towards [`]: decreases the volume

1/;:

Playback/Pause

If you do not hear the sound, check the settings of [SETUP] >> [12bit AUDIO].

6:

5:

:

Rewind/Review playback (Reverts to playback with the 1/; icon.) Fast forward/Cue playback (Reverts to playback with the 1/; icon.) Stop

ª Repeat playback

When the tape end is reached, the tape will be rewound and played back again.

1 Set [ADVANCED] >> [REPEAT PLAY] >>

The power will not turn off when the LCD monitor and the viewfinder are closed and retracted during Tape playback mode. During cue/review playback, fast-moving images may show noise as a mosaic. Before and after cue/review playback, the screen may become blue for a moment or images may be disturbed.

[ON].

The [

] indication appears. (In order to

cancel the repeat playback mode, set [REPEAT PLAY] >> [OFF] or turn off the power.)

ª Settings on the audio

If you cannot listen to the desired audio when playing back a tape, check the settings in [SETUP] >> [12bit AUDIO]. When you record the audio in [12bit] and set [SETUP] >> [12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [AUDIO OUT].

35

LSQT1284

Document info
Document views309
Page views309
Page last viewedMon Jan 23 17:16:54 UTC 2017
Pages60
Paragraphs1619
Words19264

Comments