Playback on TV
≥Set to Tape Playback Mode.
1 During playback, move the joystick up to select the [1/;] icon to pause playback.
Images recorded by this Camcorder can be played back on a TV. ≥Insert a recorded tape into this Camcorder. ≥Be sure that the power of the unit is turned off
before connecting it to a TV.
1 Connect the Camcorder and a TV.
2 Push the [sVOLr] lever.
[AUDIO IN] 1
≥Connect the Camcorder and a TV by using the AV cable 1.
2 Turn on this Camcorder and set the mode dial to the Tape Playback Mode.
Towards [T]: normal direction Towards [W]: reversed direction
≥If you keep pushing the lever, then the images will continuously be played back frame by frame. ≥The pause icon appears for an instant. Continuous frame-by-frame playback will start after the pause icon disappears.
ª To return to normal playback
3 Select the video input that this unit is connected to. ≥If the images are not played back correctly on the TV (e.g. they are displayed vertically), perform the menu operations in accordance with the aspect ratio of the TV monitor. Set [SETUP] >> [TV ASPECT] >> [16:9] or [4:3].
4 Move the joystick up to select the [1/;] icon to start playback. ≥The image and audio are output on the TV.
5 Move the joystick down to select the [∫] icon to stop playback.
Move the joystick up to select the [1/;] icon to start playback.
≥Use the AC adaptor to free you from worrying about the battery running down.
ª If the image or audio from this Camcorder does not appear on the TV
≥Check the connections. ≥Check that the plugs are inserted as far as they
go. ≥Check the [12bit AUDIO] settings. (-41-) ≥Check the TV’s input setting (input switch).
(For more information, please read the operating instructions for the TV.)