Copying onto a DVD recorder or a VCR (Dubbing)
Pictures recorded by the Camcorder can be stored on a DVD-RAM disc or other such media. Refer to the instructions for the recorder. ≥Place a recorded cassette in the Camcorder,
and an unrecorded DVD-RAM disc or cassette in the DVD recorder or VCR.
1 Connect the Camcorder and the recorder.
Connecting with the AV cable
7 Move the joystick down to select the [∫] icon to stop playback. (Player)
≥If you record (dub) images onto another video device and then play them back on a wide- screen TV, the images may be stretched vertically. In this case, refer to the operating instructions for the device that you are recording (dubbing) to or read the operating instructions for the TV and set to 16:9 (full). ≥For more information, refer to the operating instructions for your TV set and recorder. ≥When you do not need functional indications or date and time indication, respectively set [SETUP] >> [DISPLAY] >> [OFF] or set [BASIC] >> [DATE/TIME] >> [OFF] in the Tape Playback Mode. (When you connect the Camcorder and a recorder with the DV cable, these indications may not appear.)
ª When neither image nor sound from the Camcorder is output to the TV set
≥Check that the plugs are inserted as far as they
[AUDIO IN] 1
go. ≥Check the [12bit AUDIO] settings. (-41-) ≥Check the connections.
≥Connect the Camcorder and the recorder by using the AV cable 1.
Connecting with the optional DV cable: PV-DDC9/PV-DDC9-K (Only for equipment with a DV terminal)
2 Turn on the Camcorder and set to Tape Playback Mode.
3 Select the input channel on the TV set and recorder.
4 Move the joystick up to select the [1/;] icon to start playback. (Player) ≥The image and sound are reproduced.
5 Start recording. (Recorder) 6 Stop recording. (Recorder)