X hits on this document

42 views

0 shares

0 downloads

0 comments

14 / 18

Fig. 23

14) Connect one end of the USB to the computer and second to the USB Blaster port shown in Figure 24. Also connect the Adapter to the 9V DC Power Supply Connector. Flip the RUN/PROG switch the PROG position for configuring it in AS mode. Press the Power ON/OFF switch to power up the FPGA.  

Document info
Document views42
Page views42
Page last viewedMon Nov 14 11:59:37 UTC 2016
Pages18
Paragraphs47
Words1658

Comments