X hits on this document

44 views

0 shares

0 downloads

0 comments

18 / 18

Fig. 29

16) Having downloaded the configuration data into the FPGA device, you can now test the implemented circuit. Flip the RUN/PROG switch to RUN position and Power Off the Board once and then Power up again to test it. If you want to make changes in the designed circuit, first close the Programmer window. Then make the desired changes in the VHDL design file, compile the circuit, and program the board as explained above.

Document info
Document views44
Page views44
Page last viewedFri Dec 02 21:04:17 UTC 2016
Pages18
Paragraphs47
Words1658

Comments