X hits on this document

Powerpoint document

Power of Ethernet Direct PoE Product Line Overview - page 12 / 20

87 views

0 shares

0 downloads

0 comments

12 / 20

12

PoE Product Line Introduction Managed PoE Switch (PoE Software settings)

Port: The index of PoE ports.

Enable State: Check it to enable the PoE function to the port.

Power Limit From Classification : Check it to decide the power limit method; when this check box is ticked, the system will limit the power supply to the powered device in accordance with the related class

Legacy: Check it to support the legacy power devices. (PDs may not have IEEE802.3 standard detection signature)

Priority: Pull down the selection menu item to choose the priority of power supplying.

Port Limit (<15400) mW: User can key in the power limit value which is under 15.4 Watts.

Mode: Displays the operating mode of the port.

Current (mA): Displays the operating current of the port.

Voltage (V): Displays the operating voltage of the port.

Power (mW): Displays the power consumption of the port.

Determined Class: Displays the PD’s class.

Document info
Document views87
Page views87
Page last viewedThu Jan 19 17:54:21 UTC 2017
Pages20
Paragraphs281
Words1552

Comments