NOTE Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing.
SENSOR DATA TRANSMISSION
The main unit will automatically search for the outdoor sensor. The sensor reception icon in the remote sensor area shows the status:
DESCRIPTION Main unit is searching for sensor.
A channel has been found.
Sensor data received. The sensor cannot be
and “ -- - f o u n d . “ .
NOTE If the sensor is not found, check the batteries, obstructions and remote sensor location.
For best results:
Place the sensor out of direct sunlight and rain.
Position the sensor facing the main unit, minimizing obstructions.
Place the sensor in a location away from metallic or electronic objects.
Position the sensor close to the main unit during cold winter months.
This product is designed to synchronize its clock automatically with a clock signal. BAR210:
EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany. BAR210U:
UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England. BAR210A:
WWVB-60 signal: within 3200km (2000 miles) of
Fort Collins Colorado.
To enable / disable signal reception:
Press and hold reception.
to enable or
to disable signal
NOTE Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal.
Clock signal reception indicator:
STRONG WEAK SIGNAL SIGNAL
SET CLOCK To set the clock manually, disable the signal reception first. 1. Press and hold CLOCK.