to change the settings.
3. Press CLOCK to confirm.
4. The settings order is: time zone offset, 12/24 hr
format, hour and minute. BAR210 / BAR210U: Time zone offset sets the clock +/- 23 hours from the received clock signal time. If you have deactivated the clock signal reception, do not set a value for time zone offset.
BAR210A: Select the time zone: (0) Pacific, (1) Mountain (2) Central or, (3) Eastern.
To change to auto toggle mode (clock > outdoor temperature > indoor temperature), slide AUTO ON / OFF to ON.
To manually toggle between time and temperature displays, press CLOCK or wave your hand at least 3 inches or less from the motion sensor located on the top of the main unit.
NOTE Auto toggle mode and motion sensor will be disabled if a button is pressed, but will be enabled again if no button is pressed for 5 seconds.
NOTE The installed CDS light sensor inside the unit will activate automatic LCD dimming.
This product forecasts the next 12 to 24 hours of weather.
To display temperature mode or select temperature unit: Press °C / °F.
NOTE Please keep the temperature sensor (adjacent to the adaptor socket) away from electrical devices as heat from these devices will affect accurate indoor temperature readings.