X hits on this document

137 views

0 shares

0 downloads

0 comments

14 / 50

Truck Body Opening Dimensions

CAUTION: The truck wall must be structurally strong enough to support the weight of the refrigeration unit.

NOTE: Unit mounting locations must allow for adequate tilt clearance (see Service Area Dimensions).

Model 30 (approximate weight)

MD-200 382 kgs. (842 lbs.)

MD-300 392 kgs. (864 lbs.)

1. Gasket sealing surface of 50.8 mm (2.00 in.) wide is required around the unit opening. This surface must be flat within 6.4 mm (0.25 in.) for proper gasket sealing and free of all rivets or head bolts. Evaporator to be positioned 25.4 mm (1.00 in.) below ceiling.

Model 50 (approximate weight)

MD-200 405 kgs. (892 lbs.)

MD-300 415 kgs. (914 lbs.)

14

Document info
Document views137
Page views137
Page last viewedFri Dec 09 06:00:08 UTC 2016
Pages50
Paragraphs453
Words4996

Comments