§ 95112. Data Requirements and Calculation Methods for Cogeneration Facilities.
Greenhouse Gas Emissions Data Report. The operator of a cogeneration facility specified in section 95101(b) shall include the following information in the greenhouse gas emissions data report for each report year. The operator of a cogeneration facility that is a self-generation facility with nameplate generating capacity less than ten megawatts and is not otherwise subject to the requirements of this article as specified in Section 95101(b)(1)-(6) and (8), may elect to submit an abbreviated emissions data report as specified in Section 95112(c).
Facility level and generating unit information as specified in sections
95111(a)(1)-(3) as applicable.
Prime mover of each cogeneration system.
Identification of the cogeneration facility as a topping cycle or bottoming cycle plant
Description of waste heat technology, including nameplate data for waste heat boiler, waste heat jacket heat exchanger, absorption chiller, and hot water heat exchanger
Electricity sold wholesale (MWh)
Electricity sold or provided directly to end-users (MWh) and end-user’s NAICS code
Electricity consumed on-site for each report year (MWh)
Efficiency of electricity generation, if known
Thermal Energy Production:
Total useful thermal output (MMBtu)
Amount of thermal energy sold or provided to cogeneration thermal host (MMBtu) and customer’s NAICS code
Amount of thermal energy from the cogeneration system consumed on-site for processes other than the cogeneration system for each report year (MMBtu)
Input steam to steam turbine, if measured (MMBtu)
Output of heat recovery steam generator (MMBtu)
Fuel fired for supplemental firing in the duct burner of the heat recovery steam generator (MMBtu)
Efficiency of thermal energy production, if known
Distributed emissions to thermal energy production (metric tonnes CO2)