X hits on this document

179 views

0 shares

0 downloads

0 comments

13 / 76

4) Use the included AC adapter to connect the POWER port to a 100-240 Vac continuous power outlet.

CAUTION To avoid risk of fire or electrical hazard, use ONLY the included AC adapter!

LEDs flash several times, and the pwr LED will remain on. If the UIP165P was properly recognized by Packet8’s network, the link LED will remain on. Test your connection by making a call with the handset and browsing to a web page from your PC. If you have any difficulty, see the Troubleshooting section. See the User Interface Guide at www.uniden.com/voip for more information on configuring your UIP165P.

  • 5)

    Place the handset in the cradle with the keypad facing forward.

  • 6)

    Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the cradle charging contacts.

  • 7)

    Charge the handset battery pack for at least 15-20 hours before using your new cordless handset for the first time.

www.uniden.com

SETTING UP YOUR BROADBAND PHONE [12]

SETTING UP YOUR BROADBAND PHONE

Document info
Document views179
Page views179
Page last viewedWed Dec 07 22:20:06 UTC 2016
Pages76
Paragraphs1684
Words16594

Comments