Switching to the Handset Speakerphone
To switch a call to the handset speakerphone, press
active call. The
icon appears on the display screen while the
speakerphone is in use.
To set "AutoTalk" and "Anykey Answer", see page 27.
For the location of the handset and base microphones, see "Controls and Functions" on page 5- 6. Position yourself as near to the microphone as possible.
If the line is in use by another handset(s), "Line In Use" appears in the base's display, and "InUse" appears in the display of all registered handsets that are not in use.
If a call waiting tone sounds while you are on a call, press talk/flash on the handset or flash on the base to accept the waiting call. There is a short pause, and then you will hear the new caller. To return to the original caller, press talk/flash on the handset or flash on the base again.
 USING YOUR PHONE
USING YOUR PHONE