X hits on this document

279 views

0 shares

0 downloads

0 comments

42 / 76

Transferring a Call

From the handset 1) During a call, press intcom/hold. The call will be put on hold, and the handset will wait 10 seconds for a transfer command.

2) Use cid/vol/

or redial/p/vol/

to select the station you want to transfer the

call to, and then press the OK soft key. A paging tone sounds on the station you are transferring the call to. If you select All, all other stations sound the paging tone. 3) When the other station accepts the call, you will automatically be disconnected.

To rejoin the call, press talk/flash or

.

To cancel the transfer but leave the caller on hold, press the CANCEL soft key.

To cancel the transfer and speak to the caller again, press talk/flash or

.

From the base 1) During a call, press intcom. The call will be put on hold, and the handset will wait 10 seconds for a transfer command.

2) Use volume

/

(up/down) to select the station you want to transfer

the call to, and then press the OK soft key. A paging tone sounds on the station you are transferring the call to. If you select All, all other stations sound the paging tone. 3) When the other station accepts the call, you will automatically be disconnected.

To rejoin the call, press

.

To cancel the transfer but leave the caller on hold, press the CANCEL soft key.

To cancel the transfer and speak to the caller again, press

.

[41] USING YOUR PHONE

www.uniden.com

USING YOUR PHONE

Document info
Document views279
Page views279
Page last viewedTue Jan 24 19:39:01 UTC 2017
Pages76
Paragraphs1684
Words16594

Comments