X hits on this document

155 views

0 shares

0 downloads

0 comments

44 / 76

Using One Touch Voice Mail Access

note

The UIP165P provides one-touch access to Packet8's voice mail service. Follow the steps below to program the Packet8 access number into any registered handset(s):

The UIP165P's Voice Mail Tone is already configured to work with Packet8's system. Do not change the Voice Mail Tone setting.

  • 1)

    Press the MENU soft key. Select the Handset Setup or Base Setup menu, and then the Edit Voice Mail submenu. Edit V_mail No. appears.

  • 2)

    Enter the Packet8 voice mail access number: **012-0555

  • 3)

    Press the OK soft key.

To delete the current Voice Mail Access Number, delete all numbers in step2 using the DELETE soft key and the OK soft key.

When you have messages the New Message LED will flash. To retrieve your messages, simply press on the handset or soft key on the base. If you have not entered the access number or it has been deleted, No Number Stored Store number in Menu Setup appears on the handset (or No Number stored To store number press [MENU] appears on the base) and you will hear a beep. The phone returns to standby mode.

Resetting the New Message LED

If the LED remains on after you’ve retrieved your messages, you may need to reset the indicators. With the phone is in standby mode, press and hold find hs on the base until the paging sound stops (about 5 seconds).

[43] USING ONE TOUCH VOICE MAIL ACCESS

www.uniden.com

USING ONE TOUCH VOICE MAIL

Document info
Document views155
Page views155
Page last viewedSat Dec 03 10:52:07 UTC 2016
Pages76
Paragraphs1684
Words16594

Comments