Selecting a phonebook entry where a number is already stored overwrites the old number. The new number will be stored in the phonebook entry.
The pause key counts as one digit. Pressing the PAUSE soft key on the base or the redial/ p/vol/∨ on the handset more than once increases the length of the pause between numbers. Each pause represents a 2 seconds delay.
If you choose not to store a Distinctive Ring, simply select the "No Selectn" option.
If you choose not to store the name/ number as a Speed Dial, simply choose the "No Selectn" option.
 USING TH
4) Press the OK soft key to store the name; Store/Edit No. appears. 5 ) U s e t h e n u m b e r k e y p a d , * / t o n e / < , o r # / > t o e n t e r t h phone number (up to 20 digits). If you make an error, use the DELETE soft key to erase the incorrect digits. When you are finished, press the OK soft key to store the number. 6) If you store the phonebook entry in the handset, Distinctive Ring appears. Press volume up/down to move the pointer to one of the Distinctive Ring options and then press the OK soft key. 7) Speed Dial appears. Press volume up/down to move the pointer to select the Speed dial location (10 locations: SPD1-SPD0). 8) Press the OK soft key. You will hear a confirmation tone, and Done! appears in the display. e
&KUVKPEVKXG 0Q 5GNGEVP (NKEMGT
The phonebook entries in the station are not limited to phone numbers. You can also store a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Store the account number in one of the phonebook entries (refer to "Entering New Phonebook Entries and Speed Dial Numbers" on page 44). When you call your bank and are prompted to enter the account number, scroll through your phonebook entries until you find your account number, and then press the DIAL soft key.
E PHONEBOOK AND SPEED DIAL
USING THE PHONEBOOK AND