X hits on this document

170 views

0 shares

0 downloads

0 comments

8 / 76

Setting up your Broadband Phone

Safety Recommendations

To ensure general safety, follow these guidelines: Do not open or disassemble this product. Do not expose the product to moisture. Do not perform any action that creates a potential hazard to people or makes the equipment unsafe. Ultimate disposal of this product should be handled according to all national laws and regulations. Do not touch the wires on the cable ports or the wires of cables connected to a port as hazardous voltage may be present on these wires when the equipment is powered on. The plug-socket combination must be accessible at all times because it serves as the power disconnect. To avoid electric shock, do not connect the UIP165P to any RJ-11 telephone wall jacks. Use caution when connecting cables. This could damage the UIP165P or the telephone wiring in the building. Do not work on the system or connect or disconnect cables if lightning or thunder are present in your area. Do not cover or block the air vents on the top or bottom surface of the UIP165P. Overheating can cause permanent damage to the unit. Read the instructions completely before connecting the system to its power source.

[7] SETTING UP YOUR BROADBAND PHONE

www.uniden.com

SETTING UP YOUR GETTING STARTED

BROADBAND PHONE

Document info
Document views170
Page views170
Page last viewedMon Dec 05 19:17:24 UTC 2016
Pages76
Paragraphs1684
Words16594

Comments