X hits on this document

187 views

0 shares

0 downloads

0 comments

9 / 76

911 Service Notice

911 dialing is not automatic. Packet8 offers Enhanced 911 calling as a standard feature of its Internet phone service. However, there are certain circumstances, when you dial 911 from a phone connected to the Packet8 service, where E911 service may not function, or the E911 service may be in some way limited by comparison to traditional 911 service. Please review the Terms and Conditions at www.packet8.net for additional information.

Before You Start!

Visit the Packet8 activation website http://activate.packet8.net/ and enter the MAC address ID found on the bottom of your UIP165P. After you activate the UIP165P, you will receive an email containing a 10-digit activation code. You will need this activation code in Step 3.

STEP 1: Check Your Equipment

Check your broadband setup and the other equipment you will need: A broadband modem and a broadband Internet connection A computer with an Ethernet port (or a local Ethernet switch or router) One CAT-5 Ethernet cables The Packet8 10-digit activation code that was emailed to you when you created your account. (If you don't have this email, go to www.packet8.net and enter the email address and password used to create the account in the account sign in at the top of the screen.) If you want to use an analog phone or fax machine with the UIP165P, you will need a standard telephone cable (RJ-11).

note

If you ordered your UIP165P directly from Packet8, it will already be activated for you. Your 10-digit activation code was in the confirmation email you received when your UIP165P shipped. (If you don’t have this email, go to www.packet8.net and enter the email address and password used to create the account in the account sign in page.)

www.uniden.com

SETTING UP YOUR BROADBAND PHONE [8]

SETTING UP YOUR BROADBAND PHONE

Document info
Document views187
Page views187
Page last viewedFri Dec 09 00:02:37 UTC 2016
Pages76
Paragraphs1684
Words16594

Comments