X hits on this document

PDF document

Simplified Activation User Guide - page 6 / 11





6 / 11

Electronic Service Agent for i5/OS V5R3 Simplified Activation User Guide - Version 1.0

Chapter 2. Electronic Service Agent setup using Simplified Activation

You may see several of the following panels during your Simplified Activation:

  • 1.

    Using a 5250 emulator, sign on to the ~ i5 system or logical partition with a user profile (other than QSECOFR) that has a *SECOFR user class and its system defined special authorities.

  • 2.

    Enter this command: DSPSYSVAL QRETSVRSEC Confirm this system value is set to 1. Change the system value to 1, if needed, using the CHGSYSVAL QRETSVRSEC command.

  • 3.

    You must have these products are installed on the ~ i5. Confirm by using the DSPSFWRSC command:

    • 5722SS1 Option 34 (OS/400 - Digital Certificate Manager)

    • 5722AC3 (Crypto Access Provider 128-bit)

    • 5722JC1 (IBM Toolbox Kit for Java)

4. Ensure the latest recommended PTFs are installed to i5/OS V5R3.

The latest PTFs for Service Agent can be found at the following site. http://www.ibm.com/eserver/iseries/support/s_dir/slkbase.nsf/recommendedfixes

Select V5R3 for the Operating System release, then select Electronic Service Agent as the topic and click the GO button.

  • 5.

    Enter this command: GO SERVICE

  • 6.

    If the Add Contact Information (ADDCNTINF) command is prompted, add or

update the contact information for this system. Press Enter.

  • 7.

    If the Create Service Configuration (CRTSRVCFG) command is prompted, notice that *SELECT is the value for several parameters. Press Enter. An additional panel will be displayed for each parameter for which *SELECT was specified. On each of these additional panels make a selection and press Enter.

  • 8.

    The Service Agent Main Menu is displayed.

Your Simplified Activation of Electronic Service Agent is complete!

Page 6 of 11

Document info
Document views36
Page views36
Page last viewedTue Jan 24 03:54:18 UTC 2017