X hits on this document

23 views

0 shares

0 downloads

0 comments

2 / 8

Dialogic® D/41JCT-LS Media Board

Datasheet JCT Media Boards

Technical Specifications

Number of ports Maximum boards per system CT Bus loads per board Maximum CT Bus loads per system Analog network interface Resource sharing bus

4 8 1 20 4 on-board loop start interface circuits

CT Bus H.100

Control processor Digital signal processor Supported operating systems

80C186 @ 34.8 MHz Freescale DSP56303 @ 100 MHz, with 128Kx24 private SRAM

Linux: Dialogic® System Release 6.1 SU; Windows: Dialogic® System Release 6.0 SU. Details at http://www.dialogic.com/systemreleases

CSP FAX Signaling

Yes Yes Analog loop start

Host Interface — PCI and PCI Express Bus compatibility

PCI: Complies with PCI-SIG Bus Specification, Rev. 2.2 PCIe: Complies with PCI-SIG PCI Express Base Specification, Rev. 1.1

PCI Bus speed PCI Bus mode Shared memory Interrupt level

33 MHz maximum Target mode operation only 32 KB page

1 IRQ (INTA) shared by Dialogic® JCT Media Boards, including Dialogic® D/4PCIUF and D/4PCIU4S Media Board models

I/O ports

None

Platform — PCI and PCI Express Form factor

Universal PCI and PCI Express 12.3 in. (31.24 cm) long without edge retainer, or 13.3 in. (33.78 cm) long with edge retainer 0.79 in. (2 cm) wide (total envelope) 3.87 in. (9.83 cm) high (excluding edge connector)

Power Requirements — PCI +5 VDC +12 VDC –12 VDC

750 mA maximum 200 mA maximum 100 mA maximum

Power Requirements — PCI Express +12 VDC

450 mA maximum

2

Document info
Document views23
Page views23
Page last viewedMon Dec 05 17:29:07 UTC 2016
Pages8
Paragraphs219
Words2364

Comments