X hits on this document

PDF document

TECHNICAL SPECIFICATIONS - page 1 / 1

4 views

0 shares

0 downloads

0 comments

1 / 1

TECHNICAL SPECIFICATIONS

Catalog Number tYPe Date PrePareD bY ProJeCt

LDI Direct/Indirect

Housing: one-piece steel housing with high-gloss, baked white enamel finish over rust inhibiting phosphate coat. Continuous row end plates designed for easy linear mounting.

ReflectoR: Perforated housing with translucent milk white acrylic overlay allows ambient light distribution. Individually mounted units supplied with formed plastic end plates that will not fade or discolor.

electRical: Fully wired for uNV 120-277V, 50-60Hz operation with thermally protected, automatic resetting Class , sound rated a electronic ballast as standard unless otherwise specified. ul listed.

Mounting: Individual or continuous row pendant mount with aircraft cable or stem/canopies. Continuous row fixtures include joiner plate to eliminate light leak, order lDIJP and lDIeC separately. row units available in 4’ and 8’ increments only.

series

lamps

options

ldi ldii = individual with 2 end caps

232 = (2) 32W 48” t8 254 = (2) 54W 48” t5Ho 2232 = (4) tandem 32W 48” t8 2254 = (4) tandem 54W 48” t5Ho

els1 = emergency lighting (low lumens) els2 = emergency lighting (medium lumens) els3 = emergency lighting (high lumens)

ldi series ordering information

Dimensions

14 1/4" 2 3/8"

1 1/8"

3 3/4"

5 1/4"

4 7/8"

4 7/8"

Ballast

B11 = electronic t8 B11HP(x) = HPt8* B12 = electronic t5

Voltage unV = 120-277V

accessories

ldiJP = linear Direct/Indirect Joiner Plate, order one less than number of fixtures. ldiec = linear Direct/Indirect end Cap, order 1 pair for each row. ldiPM(x)** = Pendant mount Kit, includes 2 white stems, mounting brackets and canopies -

specify length in inches (24, 36, 48, 60, 72) cacc(xx)** = Cable Kit, includes 2 cables, mounting hardware, white power cord and canopies;

specify length in inches (48 or 72)

*CEE listed T8; specify (L)o , (N)ormal, or (H)igh ballast factor. Contact factory for NEMA Premium. **Requires 1 Pendant Mount or Cable Kit per 4’ or 8’ tandem unit

linear Row Mounting

end Plate

Joiner Plate

end Plate

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Phone (800) 523-3602 • Fax (215) 831-7703 • www.simkar.com

Document info
Document views4
Page views4
Page last viewedThu Oct 27 13:16:18 UTC 2016
Pages1
Paragraphs35
Words339

Comments