X hits on this document

361 views

0 shares

0 downloads

0 comments

43 / 108

  • Share the information with appropriate staff,

  • Sign-off on the final list of indicators and compliance verification strategies.

Below is the container management section of the SQG Final Draft Indicator Acceptance Worksheet:

SQG FINAL DRAFT INDICATOR ACCEPTANCE WORKSHEET

C a t e g o r y

Sub Indicator Category

Final Draft Indicator

Default Federal Requirements for SQGs

Compliance Verification

Accept Indicator Wording & Accept Compliance Verification

Data Source

Containers Labeled

Are all hazardous waste containers properly labeled with the words “hazardous waste” and clearly marked with the date for which accumulation began?

Containers Closed

Are all hazardous waste containers closed unless waste was being added or removed?

Containers in Good Condition

Are all hazardous waste containers in good condition, (i.e., free of severe rusting or apparent structural defects, and not leaking)?

C O N T A I N E R

M A N A G E M E N T

§ 262.34

(2) The date upon which each period of accumulation begins is clearly marked and visible for inspection on each container;

(3) While being accumulated on-site, each container and tank is labeled or marked clearly with the words, “Hazardous Waste”

§ 264.173

(a) A container holding hazardous waste must always be closed during storage, except when it is necessary to add or remove waste.

§ 264.171

If a container holding hazardous waste is not in good condition (e.g., severe rusting, apparent structural defects) or if it begins to leak, the owner or operator must transfer the hazardous waste from this container to a container that is in good condition or manage the waste in some other way that complies with the requirements of this part.

Field observer will determine:

Accept Indicator

• If all containers have labels

Yes ( ) No ( )

• If labels are marked with both items

Accept Compliance Verification

• If labels are clear and legible

Yes ( ) No ( )

Accept Indicator

Accept

• Field observer

Indicator

will perform

visual inspection

Yes ( )

of conditions of

No ( )

all containers

looking for leaks

Accept

and/or severe

Compliance

corrosion,

Verification

bulging, rusting or

dents

Yes ( )

No ( )

  • Field observer

will confirm that all containers are closed at the time of inspection unless waste was being added or removed

Yes ( ) No ( )

Accept Compliance Verification

Yes ( ) No ( )

New ()

Existing ()

Combo ()

New ()

Existing ()

Combo ()

New ()

Existing ()

Combo ()

The States Common Measures Project Final Report

43

Document info
Document views361
Page views361
Page last viewedFri Jan 20 18:20:57 UTC 2017
Pages108
Paragraphs3821
Words29990

Comments