X hits on this document

298 views

0 shares

0 downloads

0 comments

97 / 108

Exhibit 5.1: States Common Measures Project Auto Body Performance Checklist

ANSWER ALL QUESTIONS UNLESS SPECIFICALLY DIRECTED TO SKIP A QUESTION.

Answer all yes/no questions even if the indicator is not a requirement in your state. In such cases, please consider the indicator a Best Management Practice and evaluate whether the facility is engaged in the practice.

If there are any doubts about verification of conformance with an indicator, inspector should discuss it with state project lead.

Date of Visit:

___________________________Agency/Regional Office:

______________________________

Field Observer:

Tel.

_________________________________________

_____________________________________

Facility Name:___________________________________________________________________________________

Facility Address:

_________________________________________________________________________________

Name of Contact Person: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Telephone number of Contact Person: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Generator ID Number:

SIC:

___________________________ AIR INDICATORS

______________________________________

1.

Are all spray-applied coatings applied using an HVLP spray gun or an equivalent high transfer efficiency technology?

Y

N

Visual inspection of spray gun for HVLP mark. If no HVLP mark on spray gun, inspector will ask facility for any documentation that demonstrates spray gun achieves the transfer efficiency of an HVLP spray gun.

If no documentation is available, inspector will collect spray gun manufacturer’s name: ______________________________________________________ and model number_______________________________________

Note: If flow is 15-26 cubic feet per minute and PSI at orifice is less than 10 lb per square inch, then likely to be an HVLP spray gun

Other equivalent high transfer efficiency technology examples include electrostatic application, airless spray gun, air assisted airless guns.

The States Common Measures Project Final Report

97

Document info
Document views298
Page views298
Page last viewedSat Dec 10 19:18:23 UTC 2016
Pages108
Paragraphs3821
Words29990

Comments