X hits on this document

7 views

0 shares

0 downloads

0 comments

2 / 2

ADA Compliant METRO URBAN Toilet

Features

  • ADA COMPLIANT CONFIGURATION

  • DESIGNED TO WORK WITH STANDARD RESIDENTIAL WATER INLET AND WASTE OUTLET

  • Toilet with Cistern Tank

  • 16-Gage Stainless Steel Construction

  • Elongated Toilet Bowl; Punched & Threaded for Top Mounted Toilet Seat (1/4-20 x 1” Screws Provided, Seat Sold Separately)

  • Polyethylene Inner Tank Releasing 1.6 Gallons (6 Liters) per Flush

  • Uses Fluid Master® Toilet Flush Valves and Lever

  • Available in Satin (Standard), Mira High Polish or Cosmic Finishes

  • Mira High Polish Rim on Cistern Cover (Standard)

  • Codes/Standards Applicable - CSA and ANSI A112.19.2M 31-1/4”

    • (794)

      7-3/8”

(187)

20” (508)

Ordering Options O r d e r i n g O p t i o n s 8 9 5 0 - A D A - 3 A D A C o m p l i a n t M e t r o U r b a n T o i l e t S a t i n F i n i s h

8950-ADA-3-HP

ADA Compliant Metro Urban Toilet Mira Finish

32-1/8” (816)

8950-ADA-3-CMF ADA Compliant Metro Urban Toilet Cosmic Finish

12” (305)

17”(432)

Other ADA considerations may be required. Please check your local ADA regulations.

6” (152)

11-1/2” (292)

12” (305)

PRODUCT Specification . . . Metro Urban Toilet shall be made of 16-gage type 304 stainless steel. The toilet bowl is elongated and is punched and threaded (1/4-20) for a top mounting elongated toilet seat. (Seat not included.) The bowl also has an ADA compliant, 17" (432 mm) rim height. Stainless steel trapway passes a 2-1/8“ (54 mm) ball. Toilet tank shall have a polyethylene inner liner. Aconventional Fluid Master® float/flapper mechanism and ADA compliant flush activating lever are used. Toilet meets ANSI A112.19.2M requirements using an average water consumption of 1.6 gallons (6 liter) per flush. Toilet also meets CSA requirements. Although this toilet is ADA compliant, please check your local regulations as other ADA considerations may be

required.

PLUMBING Specification

. . . Toilet uses standard residential water inlet and waste. Fill valve inlet is 1/2” NPS. Wall inlet location

is recommended at 6”(152 mm) from the center and 10” (254 mm) from finished floor. On-floor waste outlet to be located 12” (305 mm) from finished wall. Access via removable side panels.

Approved for Manufacturing Company

Project Name

All dimensions are nominal and subject to manufacturer’s change without notice.

Authorized Signature

Name Written Clearly

Date

Neo-Metro Collection is a division of Acorn Engineering Company

Call Us at (800) 591-9050 • Web Site: www.neo-metro.com

NEO-METRO Collection • P.O. Box 3527 • City of Industry, CA 91744 USA • Phone (626) 855-4854 • Fax (626) 937-4725

TS 8950

PAGE 2 OF 2

Document info
Document views7
Page views7
Page last viewedMon Dec 05 06:36:02 UTC 2016
Pages2
Paragraphs98
Words939

Comments