X hits on this document

PDF document

Updating the Media Interface Plus To update Media Interface Plus (MIP) in order to enable the Text ... - page 1 / 2

6 views

0 shares

0 downloads

0 comments

1 / 2

Updating the Media Interface Plus To update Media Interface Plus (MIP) in order to enable the Text (SMS) / Email read-out and reply functionality, an Application software and Bootloader software need to be installed. Please be advised the USB adapter cable (included in scope of delivery) is required. The following three steps need to be taken for the software update:

1. Reading out the current Media Interface Plus Software version To display the current software version, select “Playlist > Settings > Show MI plus software version”. Before installing the new software, the MIP should NOT read the following software version as indicated below, as it means the new software is already loaded on the MIP.

Software Version

Bootloader Version 2. Installing the Application software In order to install the Application software, the folder “MIP_APP_4810.zip” has to be extracted using Winzip to a compatible flash drive (USB stick). IF PROMPTED A PASSWORD, PLEASE ENTER “mbusa”. Please verify that only the folder “REL_0057” and the two files “do_update” and “update.cfg” are present in the directory of your flash drive.

With the MIP connected to the Media Interface outlet, select “Music > Playlist > Settings > MI plus software update”.

Document info
Document views6
Page views6
Page last viewedMon Dec 05 12:30:19 UTC 2016
Pages2
Paragraphs9
Words377

Comments