Collodion MSDS page 2
Emergency and First Aid Inhalation: Remove patient to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician. Ingestion: Give water to drink. Induce vomiting if medical help is not immediately available. Obtain medical attention immediately. Skin: Remove contaminated clothing. Wash skin with plenty water for at least 15 minutes. If irritation develops, obtain medical attention. Eye: Wash eyes with plenty water for at least 15 minutes. Obtain medical attention immediately.
Reactivity Data Stability: Stable Hazardous Polymerization: Will not occur Conditions to Avoid: Flame, heat, sparks Incompatibility: Strong alkalies, acids and oxidizing agents. Hazardous Decomposition Products: Oxides of carbon
Spill, Disposal and Storage Information Spill: Shut off all sources of ignition. Evacuate area. Wear self-contained breathing apparatus, rubber gloves and protective clothing. Absorb on sand or vermiculite and place in closed containers for disposal. Disposal: Ensure compliance with local, state and federal agencies. Storage: Store in a cool, dry well-ventilated location, away from any area where the fire hazard may be acute. Separate from oxidizing materials.
Protective Equipment and Control Measures Respiratory: Full face piece chemical cartridge respirator may be worn. Gloves: Rubber or neoprene Eye: Chemical safety goggles and/or full face shield. Ventilation: Local and/or general exhaust.
RTECS #: Amyl acetate
LD50/LC50 Amyl acetate
LD50 = 7400 mg/kg
LD50 = >1600 mg/kg
TCLo = 500 mg/m3/30
LD50 = >5 g/kg
LD50 = >5 g/kg
Amyl acetate – Not listed by ACGIH, IARC, NTP or CA Prop 65 Nitrocellulose - Not listed by ACGIH, IARC, NTP or CA Prop 65 Epidemiology: No information found Teratogenicity: No information found Reproductive Effects: No information found Mutagenicity: No information found Neurotoxicity: No information found