X hits on this document





12 / 44

H:  Learning Step/Activity - Provide instruction on the RL levels .

Method of Instruction: CO.  Instructor to student ratio is: 1:18.

Time of Instruction:       minutes

Media:  Slides   thru

NOTE:  Slide

    a.  Readiness Levels - Identify crew member’s training phase and mission readiness.  

    b.  They also provide a logical progression for aircrew training based on tasks and mission proficiency.      

NOTE:  Readiness levels do not apply to DAC’s.


    c.  RL status may be determined by crew member’s qualifications at last unit as compared to task required at the assigned unit.  Initial designation to other than RL3 on  all IERW aviators upon their integration into the ATP program at their gaining units.

    d.  Aviator must demonstrate proficiency in each mode

of flight required by applicable ATM & CTL.

    e.  All Aviators on initial assignment from the IERW coarse will be placed RL 3, unless the COMMANDER’S EVALUATION PFE has determined the aviator to be RL 2.

Note:  Readiness levels do not apply to DAC’s.

        (1)  RL 3 - Status while undergoing qualification or refresher training in

primary, alternate, or additional aircraft.  Crew members must demonstrate proficiency to

an SP, IP, or IE in all base tasks in order to progress from RL 3.  All RCMs must

fly with an SP, IP, or IE with access to the flight controls.  The NCMs will undergo

qualification or refresher training by an SP, IP, IE, FI, or SI without access to the

flight controls and in a position to observe the NCM.

        (2) RL 2 - Status while undergoing mission and additional tasks designated by

the unit commander in support of the unit’s METL.  The goal is proficiency in mission

related tasks.  Commanders should tailor their task list to meet specific unit needs.

            (a) RL 2 RCMs will not be part of a crew performing mission tasks in which he

has not demonstrated proficiency unless he is with an IP, SP, ME, or UT with access to the

flight controls.  For NCMs, the IP, SP, UT, FI, or SI must be at a station without access

to the flight controls and in a position to observe the NCM.  All aviators must complete

Document info
Document views147
Page views147
Page last viewedSun Jan 22 14:39:53 UTC 2017