X hits on this document

79 views

0 shares

0 downloads

0 comments

10 / 20

Page 10 of 20

NOX1010/NOX606 NOX404/NOX303 NOX202

NOX606 Top Panel

FREQUENCY knob adjusts eect’s frequency or time-based parameter

FX ASSIGN knob selects which sources are aected by eect

selected

input

eect

sensitivity

GAIN knob

FX DISPLAY

controls

indicates

channel

through available

allows eect’s tempo

eects, pressing parameter to

knob conrms selection

be entered manually

FX ON button activates digital eects processor

FX SELECT knob scrolls

TAP button

MASTER VU METER displays master output and/or cue signal level

AUX 1/2 knobs adjust channel signal level at AUX SEND 1 and 2 jacks, PRE buttons send signal to AUX SEND jack pre-fader

FX CUE button sends eect to cue section for preview

MIC/RTN switch selects XLR MIC or stereo 1/4" RETURN inputs as channel audio source

MIC GAIN knob controls sensitivity of mic input

DATA/MIDI knob allows adjustment of data, such as MIDI clock speed

MIDI ON button sends MIDI start/ stop data to external sequencer

LFO DEPTH knob adjusts amount of LFO (low-frequency oscillator) modulation applied to lter

MIC EQ knobs adjust channel equalization

MIX 1 knob adjusts level of MIX 1 XLR outputs on rear panel

CUE button allows source monitoring without inclusion in master output

MIX 2 knob adjusts level of MIX 2 1/4" jacks on rear panel

VU METER displays

switch selects channel audio

knobs boost/ cut high,

input source source

mid and low

signal level

frequencies

INTENSITY fader adjusts eect’s mix or resonance parameter

CHANNEL

INPUT SELECT CHANNEL EQ

LFO ON button

X2 TEMPO button doubles LFO speed

TAP button allows LFO speed to be entered by tapping with music

MONO button switches BOOTH signal from stereo to mono

Document info
Document views79
Page views79
Page last viewedSat Dec 10 20:40:07 UTC 2016
Pages20
Paragraphs955
Words5083

Comments