X hits on this document

PDF document

ULTRA PURGE LOW-E - page 9 / 11

25 views

0 shares

0 downloads

0 comments

9 / 11

8.2 Respiratory system protection When cleaning the press or the extruder follow the same precautions as if working with melted polymers

8.3 Hand protections When cleaning the press or the extruder follow the same precautions as if working with melted polymers

8.4 Eye protection When cleaning the press or the extruder follow the same precautions as if working with melted polymers

9.Chemical and physical properties

Physical state solid granules Odour - odourless

Ph: Boiling point from: Melting point from: In flammability point from: Ignition temperature:

>450 °c

N/A N/A 70 °C >300 °c

Explosive properties: Combustion properties: Comparative density at 25°c: Solubility: Thermal decomposition:

none

none 0.70 gr/cc negligible water solubility starts at 85°c

10.Stability and Reactivity

10.0 General information No dangerous reaction is known if storage and handling are performed in compliance with the instructions

10.2 Hazardous conditions: avoid temperatures higher than 80°c. except during the use of the product, do not exceed the temperature of 320°c (60 8 f) in case a product for higher temperatures is required, please contact to the supplier

10.3 Hazardous substances: none

10.4 Dangerous decomposition products If storage and handling are performed as per instructions: none

  • 11.

    Toxicological information

    • 11.1

      General practices

On the ground of our present knowledge it is physiologically tolerable. According to our present knowledge it is neither alterable, nor cancerogenous nor teratogenous.

Document info
Document views25
Page views25
Page last viewedSun Dec 04 17:43:26 UTC 2016
Pages11
Paragraphs209
Words1933

Comments