X hits on this document

36 views

0 shares

0 downloads

0 comments

2 / 12

HIGH-SPEED SEQUENCE PROGRAM CONTROLLED PNEUMATIC DIE FORGING LINE

HIGH-SPEED SEQUENCE PROGRAM CONTROLLED PNEUMATIC DIE FORGING LINES

1999 Chambersburg/Ceco Die Forger, MDL. 23, Falling Weight 5,000 LB, Max Blow Energy 23,800 Foot Pounds, Ram Stroke 19", Cylinder Bore 26", Die Space Between Guides 27 1/4", Ram 24" F-B, Anvil Cap 36" F-B, Closed Die Height 12"–16", Gerb Isolation Spring System, 2200 Gallon Brunner Air Receiver, Ceco Mark IV Control, S/N M2941 With Yr 2000 American Induction Heating Vibratory Bowl & Shaker/Loader Table, S/N 28474-2-00; Billet Feeder; Yr 2000 American Induction Heating MDL. PS/CS 10003 1000 KW Billet Heater, S/N 28361-1-00;Yr 1995 150-Ton Verson Gap Frame Press, MDL. OBG150, Stroke 8", SPM 50, Bed 30" x 50", Shut Height 21.88", Motorized Adjustment 6", Air Clutch & Brake, S/N 29165

1999/ 1988

1988 Chambersburg/Ceco Die Forger,MDL.23,Falling Weight 5,000 LB,Max Blow Energy 23,800 Foot Pounds,Ram Stroke 19",Cylinder Bore 26",Die Space Between Guides 27 1/4", Ram 24" F-B, Anvil Cap 36" F-B, Closed Die Height 12"–16", Gerb Isolation Spring System, Ceco Mark IV Control, S/N M2877-L With General Kinnamatics MDL. 12798 Vibratory Feeder Bowl & Shaker/ Loader Table, S/N C6051-02; Yr 2000 Heating Induction Systems 1000 KW Billet Heater; 150-Ton Verson Gap Frame Press, MDL. OBG150, Stroke 7", SPM 60, Bed 30" x 50", Shut Height 28", Motorized Adjustment 6", Air Clutch & Brake, S/N 23185

1986 (Re-Machined 1992) Chambersburg/Ceco Die Forger, MDL. 14, Falling Weight 3,200 LB, Max Blow Energy 14,400 Foot Pounds, Ram Stroke 18", Cylinder Bore 20 1/2", Die Space 23" Between Guides, Ram 20 1/2" F-B, Anvil Capacity 30" F-B, Closed Die Height 10"–14", Gerb Isolation Spring System, S/N R93440 (2546-L) With Yr 1997 American Induction MDL.VbF87 Feeder Bowl, Diameter 72" & Shaker/Loader Table;Tocco MDL. CS12-700-5.5 Induction Heater, 875 KW, S/N 12-9204-13; 88 Ton Minster Gap Frame Press, Air Clutch, S/N 2701

Chambersburg/Ceco Die Forger, MDL.14,Falling Weight 3,200 LB,Max Blow Energy 14,400 Foot Pounds, Ram Stroke 18", Cylinder Bore 20 1/2", Die Space 23" Between Guides, Ram 20 1/2" F-B, Anvil Capacity 30" F-B, Closed Die Height 10"–14", New Base and Columns.

(2) AVAILABLE

Chambersburg/Ceco Die Forger, Mdl. 23

150-TON

View of Forging Line

(2) AVAILABLE

Verson 150 Ton Trim Press

View of Forging Line

Bowl & Shaker/Loader Table

BIDITUP AUCTIONS & APPRAISALS WORLDWIDE

  • 2–

www.BIDITUP.com

Document info
Document views36
Page views37
Page last viewedMon Dec 05 08:44:29 UTC 2016
Pages12
Paragraphs393
Words3503

Comments